HYUNDAI CRYSTAL UPGRADE

 

HYUNDAI-CRYSTAL

Over-The-Air (OTA) Software Upgrade Procedure

 

Part I – Software Upgrading

1. Press “Menu”, select “Installation” and press “Ok”

2. Select “Software Update” and press “Ok”


Photobucket

3. Select “Start” and press “Ok”

4. A “Please Wait” window will appear (Do not EXIT or CANCEL)


Photobucket

5. A “New Software Window” will appear, select “Immediate” and press “Ok”

6. “Software Download” will start (Do not unplug power cable)


Photobucket

7. A status bar will appear to monitor progress of upgrading

8. Wait until progress has reached 100% to signify completion of software update


Photobucket

9. After software update has been completed, the STB or Box will reboot. A “New Software Loaded!”

    window will appear. Press “Ok”

10.The STB or Box has been upgraded and will return to the channel you are watching


Photobucket

 

Part II – Scan Channels


1. Press “Menu”, select “Installation” and press “Ok”

2. Select “TP Edit/Scan” and press “Ok”


Photobucket

3. Select “Scan” and press “Ok”

4. Select “All Network Scan Start” and press “Ok” to start channel scan


Photobucket

5. The scan window will appear to show the channels being captured and progress of scanning.

6. After scanning has reached 100%, a “Scan is Done” window will appear. Press “Ok” to finish scan.


Photobucket

 

Part III – Verify Software Version

1. Press “Menu”, select “System Setup” and press “Ok

2. Select “System Information” and press “Ok”


Photobucket

3. Software Version indicated must be SW 1.15

4. Press “Exit” on the remote control to return to your channel.


Photobucket

 

 

 
Back Home Archives