HOMECAST AUTOMATIC SOFTWARE UPGRADING

AUTOMATIC SOFTWARE UPGRADING

1.Turn unit "off" and then "on" using the switch at the back or by un-plugging the AC cord from the outlet.

2.The unit will reboot repeatedly and a message "Err: PMT PID in PAT" will appear. Just ignore and wait for the unit to boot until "Upgrade Menu" appears.

3.Wait until the status bar indicating progress of Software Download under "Data Receiving" has completed. Please do not turn-off the unit while it is downloading.

4.The messages "Download Complete" and "Installation Successful" will appear in sequence.

5.The unit will automatically "reboot", software upgrading is complete.

CHECK SOFTWARE VERSION

1.Press "menu" button on remote control, select "status" and press "ok".

2.Press "information", SW Version should be "SW 1.06".

(Note: In case of power interruption, just repeat the process for upgrading)

 

 

 
Back Home Archives